Roto Fab 2012-15 Camaro Zl1 Big Gulp Series Cold Air Intake

Description

2012-15 Camaro Zl1 Big Gulp Series Cold Air Intake

Performance

Rev up your performance with the 2012-15 Camaro ZL1 Roto-fab Big Gulp series cold air intake system. Engineered with larger duct work to minimize restriction, it’s tailored for power levels surpassing 650-700 RWHP. For vehicles at stock or with minor modifications, our standard Roto-fab cold air intake systems deliver optimal performance.

Info

Elevate your 2012-15 Camaro ZL1 with the Roto-fab Big Gulp series cold air intake system, featuring an enlarged duct size. Custom tuning is essential for all Big Gulp systems to prevent potential engine damage. The filter arrives pre-oiled and ready for immediate use; when servicing, apply 89 grams of filter oil. For replacements, use part number 10135013. Please note, this product is not available for sale, use, or distribution in California.

Features

• Massive 5 inch OD duct work
• 5 inch hump hose to absorb motor rock
• Silicone coupler for 102/103 mm throttle body
• 6 inch MAF sensor housing entry to accept our 6 inch ID filter
• Molded-in oversize breather coupler for larger breather option
• Effective seal to the hood to maximize air box volume and create space for larger filter
• Powdercoated air box with Roto-fab Big Gulp Series logo

Build

Delving deeper into it, the ZL1 Roto-fab Big Gulp series cold air intake system from 2012-15 boasts a throttle body connection with a 5-inch x 4.25-inch step hose, allowing seamless coupling with most 102mm and 103mm aftermarket throttle bodies. Additionally, there’s a 5-inch x 4.75-inch adapter (part number 10132059, sold separately) for those opting for larger setups. Users of the factory throttle body will need a 4-inch adapter (part number 10132004, sold separately) for installation. For optimal performance, upgrading to a higher-performance throttle body is strongly recommended. The cold air intake box features a bulb seal on top for effective hood sealing, providing lid benefits while maximizing space for a larger filter and increased air box volume. The inlet elbow includes an oversized breather port molded-in, equipped with two breather fitting sizes to accommodate various PCV configurations.

Quality

A 5-inch silicone hump hose is employed between the inlet elbow and the MAF sensor housing to dampen engine vibrations. The MAF sensor housing integrates the air box mounting flange with threaded inserts, transitioning seamlessly to a substantial 6-inch clamping surface for the filter. This configuration ensures secure attachment to the air box while sealing off any gaps around the ductwork, effectively shielding the filter from engine bay heat.

Specs

• Country of Origin: USA
• Sold As: Kit
• UPC: 767571538409
• Availability: Available
• Universal: No
• Filter Type: Oiled
• Dimensions: 19.00000
• Weight: 13.00000
• Vehicle Type: Car
• Installation instructions

Fitment

Roto-Fab’s Warranty

For information on Roto-Fab’s warranty terms and conditions, please click here.

Purchase Disclaimer: You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts. Bolt Motorsports does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Bolt Motorsports will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls. In accordance with local laws and regulations, Bolt Motorsports will not ship parts to locations where usage or installation of said part would be in violation of the aforementioned acts.